FEATURES:
1. Autotuning PID, and ON/OFF control
2: 3 Digit Displaying
3. Sizes: 48 mm x 48 mm. Option: 48x96mm, 48x96mm,
72x72mm, 96x96mm
4. Universal input: TC: K, E, J, T RTD: Pt100, Cu50
5. Relay control output. SSR, SCR, PWM control output are
options
6. Main output for heating; Control output can be used for
cooling or AL2.
Specification:
Input Type
|
Thermocouple
|
K, E, J, T
|
Thermo resistance
|
Pt100, Cu50,
Cu100
|
Control type
It can be freely
converted with
Control type.
|
On/off control
|
Proportion scan
0%-3600%
Integral time
0-3600S
Differential time
0-3600S
|
PI control
|
PID control
|
Control output
|
R:
|
Relay: AC 250V/3A
or DC 30V/3A
|
S:
|
SSR / logic
control output
|
T:
|
SCR control
output
|
Measuring
accuracy
|
+-0.5%F.S+-1digit
|
A/D conversion
|
Dual integral
|
Sample time
|
<0.5S
|
Power supply
|
85-260VAC/DC(TA4),
220/110VAC(TA6,7,9), or 24VDC
|
Operating
condition
|
0-50C 45-85%RH
|
Display
|
Two line 3 digit
|
Withstand
voltage strength
|
AC 1500V 1min Between power
terminal and case
|
Power supply
|
<5VA
|
Insulation
resistance
|
DC 500V>50MΩ (Between power
terminal and case)
|
You can change C to F in TA4. Please do as following:
1. Press UP and DOWN key at the same time, and hold for 5
seconds. You can see the parameter LSP, OSP, HY1... SCK
2. Select parameter SCK and set SCK=020. (This is a password for
modifying calibration parameters)
3: Press SET key you can see the parameter CJS, CJL, CJH and SEL
4: Select parameter SET and set SEL=010.
5. Press and hold UP and DOWN key for 5 seconds to return to the
measure state.
6. Press SET key for 3 seconds you can see the parameters AL1,
AM1...C-F...
7. Select parameter C-F and set C-F=F
8. Press SET key to confirm and return to the measure state
