1: SERVO MOTOR (Skewed Rotor Design)
A: KL34-180-90 (NEMA 34) Dual Shaft, Front
Shaft 1/2" Rear shaft 1/4" 1125 oz-in Peak
90V/40A, $149/pcs (Skewed Rotor Design,
Green is Ground, White is +, Black is
Common) Specification
B: KL34-170-90 (NEMA 34) Dual Shaft, Front
Shaft 1/2" Rear shaft 1/4" 850 oz-in Peak 90V,
$139 Or 72V/40A Specification (Skewed Rotor
Design, Green is Ground, White is +, Black is
Common)
C: KL34-150-90 (NEMA 34) Dual Shaft, Front
Shaft 1/2" Rear shaft 1/4"
600 oz-in Peak 90V/38A $119 Or 72V/38A
Specification (Skewed Rotor Design)
D: 1 PCS Geckodrive Servo Motor Drive G320
purchased with any servo motor: $109
Specification
F: KL34-150-90 (NEMA 34) Package: 1 PC
KL34-150-90 + 1 PC US Digital 500 line:
E5S-500-250-EG-PKG2 + 1 PC Driver G320
G: KL23-120-36 (NEMA23) dual Shaft $69
Skewed Rotor Design Specification
Constant Torque: 42 oz-in
Peak Torque: 230 oz-in
No load Speed: 4000 R.P.M
Continuous Speed: 3300 R.P.M
Terminal Voltage : 36 VDC
Continuous Current: 4 A
Peak Current: 19 A
No load Current: 0.5A
Interia: 0.22 kg cm^2
Weight : 1.1 kg
Keling Technology, Inc
1 PCS US Digital: E4P-300-250H-PK1, 1/4
Shaft -Mount Optical Encoder
E: US Digital: E5S-200-250-EG-PKG2
Individually Packaged Shaft-Mount Optical
Encoder with latching connector, 200 CPR, fit
1/4" diameter shaft. Molded mounting ears for
1.812" bolt circle (with Installation Tool)
Specification
E1: US Digital: E5S-500-250-EG-PKG2
Individually Packaged Shaft-Mount Optical
Encoder with latching connector, 500 CPR , fit
1/4" diameter shaft. Molded mounting ears for
1.812" bolt circle (with Installation Tool)
Specification
D1: 1 PCS Geckodrive Servo Motor Drive
G340, purchased with any servo motor: $140
Specification
Note: All Servo motors are tested and working
good with Geckodrive driver, Rutex driver, and
Viper DC Servomotor Drives. Any question, pls
email me
F1: KL34-170-90 (NEMA 34) Package: 1 PC
KL34-170-90 + 1 PC US Digital 500 line:
E5S-500-250-EG-PKG2 + 1 PC Driver G320
H: KL23-130-60 (NEMA23) dual Shaft $89.95
See Detail : Specification
Skewed Rotor Design, 60V/20A
Constant Torque: 50 oz-in
Peak Torque: 350 oz-in
No load Speed: 4700 R.P.M
Terminal Voltage : 60 VDC
Continuous Current: < 4 A
Peak Current: > 20 A
No load Current: 0.5A
Weight : 1.4 kg
CA-3131 Connector Description for 500 line
or 250 line Encoder: 5-pin polarized
finger-latching connector on one end of a 5
conductor shielded round 24 AWG cable.
Standard length is 6FT. $15.55/pcs
CA-3286-6FT for E4P-300-250H encoder:
4-pin micro mating connector on one end
of a 4 conductor round twisted pair 26
AWG cable. Standard length is 6FT.
